0
£0.00
£0.00
£0.00
Gentworks supplies replacement bubblers and swan-neck bottle/cup filler valves for all our stainless steel drinking fountain products. The most common reason for having to replace a valve, or the cartridge within the valve, is that a fountain has been exposed to cold weather before the fountain was drained. Cartridges are available separately should freezing damage the original one supplied with the fountain.
PAYMENT TERMS FOR STATE FUNDED SCHOOLS: Gentworks usually opens credit accounts for state funded schools on normal 30 day terms. Authorised purchase orders can be faxed to 0870 458 1884 or emailed to orders@gentworks.co.uk. Please note that all advertised prices exclude VAT and there is a £10 + VAT delivery charge per order.
Pro-Flo Cartridge (plastic cap) for Drinking Fountain Bubbler
DFBV-CARTRIDGE
|
This Pro-Flo cartridge is used within the bubbler valves of many brands of drinking fountain. Height: 42mm including spring mechanism but excluding 2.5mm pins projecting from bottom surface Diameter: 25mm for bottom surface, 17mm for spring cap Click here for the longer lasting brass version of this cartridge from the same manufacturer. |
£23.00
(ex VAT)
Superior Pro-Flo Cartridge (Brass Cap) for Drinking Fountain Bubbler
PROFLO-BRX1
|
This Pro-Flo brass longer lasting cartridge is used within the bubbler valves of many brands of drinking fountain. It is a direct but superior replacement for the plastic version of the same cartridge. Height: 42mm including spring mechanism but excluding 2.5mm pins projecting from bottom surface Diameter: 25mm for bottom surface, 17mm for spring cap |
£24.00
(ex VAT)
Replacement Plunger Cartridge for GW-BFBVA Swan-Neck Cup/Bottle filler
BFBVA-FITTINGS
|
The simple solution for repairing dripping or leaking BFBVA bottle fillers fitted to some drinking fountains and water coolers. Ideal for fixing faulty or worn out bottle fillers that just require new internal parts. Cartridge measures 44mm long with thread diameter 15.5mm. Maximum Pressure: 2 BAR |
£31.00
(ex VAT)
Replacement Bottle Filler Cartridge for GW-951 Drinking Fountain (Instantaneous)
BF-CARTRIDGE-951
|
The simple solution for repairing dripping or leaking bottle filling valve to suit GW-951 and GW-952 drinking fountains. As fitted to the following models: GW-951-(Bottle Filler Dispenser) GW-952-(Bottle Filler Dispenser) AP-451 (Bottle Filler Dispenser) AP-452 (Bottle Filler Dispenser)
|
£35.00
(ex VAT)
Replacement Valve and Push Button for Gentworks WRAS Drinking Fountains
DFBV-VALVE-WRAS
|
The simple solution for repairing dripping or leaking WRAS spring tap type bubbler valves as supplied with some Gentworks drinking fountains. As fitted to the following models: GW-361-WARS-B GW-362-WRAS-B GW-951 and GW-952 |
£38.00
(ex VAT)
Drinking Fountain Mains Water Connection Kit
DF-RAIL-PRV
|
Mains water installation rail / kit designed for aiding the connection of drinking fountains to a mains water supply pipe.
Protects the drinking fountain by preventing the maximum pressure rating being exceeded. • Isolation (shut off) / double check valve Kit includes isolation valve, double non-return valve (also known as a check valve) and Honeywell adjustable pressure limiting valve. |
£39.00
(ex VAT)
Drinking Fountain Bubbler Valve for 3/8 or 1/2 inch
DFBV3812NP
|
This shielded bubbler valve is supplied with a 3/8 inch BSP tail fitting and ½ inch BSP tap connectors or compression fit to 15mm copper tube. The stainless steel tail is 30mm long. The bubbler has a replaceable cartridge should this be required. This bubbler does not have an anti-rotation pin. This bubbler tap will fit most brands of bubbler dispenser type drinking fountains. |
£48.00
(ex VAT)
Replacement Drinking Fountain Bubbler for Gentworks Drinking Fountains
DFBV-WRAS
|
WRAS approved bubbler tap as supplied with Gentworks current range drinking fountains. This bubbler is suitable for the following Gentworks Drinking fountains: GW-361, GW-362, GW-951, GW-952 Supplied With:
|
£55.00
(ex VAT)
Swan-Neck Cup/Bottle Filler Tap for Drinking Fountain with 3/8 and 1/2 inch fittings
GW-BFBVA
|
Push button swan-neck bottle filling tap with 3/8 and 1/2 inch BSP fittings is designed for use with Gentworks & Apinox drinking water fountains. This unit is also frequently used as a replacement cup/bottle filler for other brands of drinking fountain. A brass backnut, rubber washer and 15mm compression coupler are included. Recommended is our Mains water connection kit designed for aiding the connection of drinking fountains to a mains water supply pipe. Protects the drinking fountain by preventing the maximum pressure rating being exceeded. Double check valve prevents backward flow of liquid. |