Marnic Water Watch - PIR Urinal Flush Controller

Name: Marnic Water Watch - PIR Urinal Flush Controller
Brand: Marnic
SKU: WW01-B
Price: 115.00 GBP
Availability: InStock

Category: PIR Sensor Flush Controls for urinal cisterns

Printable Version

Ask a question about this product

Price (Inc VAT)

£138.00

Our Price (Ex VAT)

£115.00

Weight 0.00 lbs

Delivery Time 2 to 4 working days

Ref WW01-B

Choose power supply

Filter & Isolation Kit

Quantity

Description

A wide-angle PIR sensor manufactured by Marnic Technologies, in an enamel painted steel case. Many thousands of this inexpensive, yet high-quality, controller have been supplied to Gentworks customers. They are very popular with schools and local authority sites as well as pubs, offices and factories.

Can be calibrated to flush up to 4 times per hour but we recommend it is set to flush 20 minutes after the sensor detects a user, therefore a maximum of 3 times per hour. If no user is detected (e.g. over weekends), there is a choice of flushing after 12 or 24 hours.

The solenoid can be installed on either vertical or horizontal pipe. An arrow on the brass body indicates the direction of flow.

Includes:
- Flush controller box with sensor eye for wall or ceiling mount above the urinals
- Marnic Solenoid valve for fitting to water supply (15mm compression fit)
- Approx 1m of 2 core cable to connect controller to solenoid
- 4.5v Alkaline Duracell battery with tails (Battery version only)
- 240v to 4.5v Built in Power Supply (PSU) (Mains version only)

See the 'More Product Info' tab for a list of other product features

Water Watch Instruction Manual - Gentworks Edition (185k)

Water Watch Quick Setup Guide

Further details can be found at www.waterwatch.co.uk

More Product Info :

Features:
- Up to 90% savings on water costs
- Extremely reliable and low maintenance
- Vandal resistant case made from heavy gauge steel
- Battery low indicator as standard on battery powered model
- Low power consumption - typical battery life 2-4 years depending on frequency of flush
- Wide angled passive infra-red sensor, occupancy detection
- Simple calibration for correct cistern fill times and flush frequencies
- Valve open switch to facilitate cistern fill time
- Maximum flush frequency is up to 4 per hour
- Janitorial flush (can be set for 12 hours or 24 hours of non-use)

WARRANTY
Control box: This is warrantied for a period of 12 months from the date of purchase. This is on a return to base service.
Solenoid: The solenoid is also warrantied for 12 months from the date of purchase, but this is restricted to manufacturing defects only. Deposits left by hard water (limescale) or debris from the water supply (often as a result of a failure to purge the water supply before installation) can cause the solenoid to stick. It is a relatively easy process to clean the valve and the process is described in the product instructions.

Send