PIR Sensor Flush Controls for urinal cisterns

Battery Powered PIR Sensor Flow Control kit for urinal cisterns, everything you need in one box.

Maintains hygiene standards whilst conserving water and dramatically cutting water costs – saving up to 95% of water usage compared with an uncontrolled cistern, and around 30-40% against more basic water management systems.
The Flow Saver consists of an electronic control sensor unit and a solenoid for installation into the water supply pipe of a urinal auto cistern. The unit monitors washroom traffic to schedule cistern flushes. Where no motion is detected a hygiene flush is initiated at 12 hour intervals. During high usage periods where the number of detections exceeds 20, the unit will temporally switch from 30 or 60 minute flushing to 15 minute flushing for improved hygiene.

Features:
•    Anti-Vandal Polycarbonate Domed Housing
•    Test Cycle Function
•    Easy Setup with LED Status Indicator and Beeper
•    Battery Powered
•    Low Battery Warning Light
•    Tamper Proof Cover With Key
•    Wall or Ceiling Mounted
•    High Quality WRAS Approved ASCO Latching Solenoid Valve

Kit Includes:
- Flush controller unit with sensor eye for wall or ceiling mount above the urinals
- Asco solenoid valve for fitting to water supply (15mm compression fit)
- Approx. 1m of  two core cable to connect controller to solenoid
- Cover release key
- Fixing plugs and screws
- 4 x AA  LR6 Alkaline Batteries

Specification:
Construction: ABS/PC
Sensor range: 3 metres
Motion sensor: Passive Infra-Red (PIR) 
Water control: DC latching solenoid valve
Water Pressure: 0.5 - 12 bar using the standard 2.0mm orifice valve
Power: 4 x AA Battery cells (LR6)
Typical Battery Life: Alkaline batteries (supplied) 12-18 months, Lithium batteries (not supplied) 2-3 years
Dimensions: 130 x 130 x 45mm

Click on the Product Data Sheets tab for downloadable instructions and data sheets.

This compact PIR flush controller, manufactured by Dart Valley Systems, incorporates the electronics and settings panel in this ceiling mounted sensor unit. Perfect for washrooms with false ceilings. Very reliable, easy to calibrate with excellent flexibility in flush and cistern fill times.

Includes:
- Solenoid valve for connection to water supply (15mm compression fit)

- Sensor, incorporating flush controller system, for fitting into ceiling above urinals

- 6v lithium battery (Duracell 223 (CR-P2) or similar) or power transformer depending on power option chosen

Features:
- Up to 80% savings on water costs
- Extremely reliable and low maintenance
- Passive infra-red sensor, occupancy detection
- Low power consumption - typical battery life of 2-4 years (battery model)
- Single battery input (battery model)
- Single valve output
- Default preset settings
- Valve open button
- Adjustable cistern fill time (15 mins max)
- Adjustable delay time after sensor triggered (30 mins max)
- Janitorial flush (if sensor not triggered for 12 hours)

        Pearl Downlighter (cistern fill model) Instruction Manual

 

Manis version (UC01- 014) currently out of stock - More due in Mid-November

The Flushmatic from KWC DVS (formerly Dart Valley Systems) is one of the most reliable flush controllers available. The controller box incorporates a sensor to detect urinal usage. It is simple to install and calibrate. Product Codes: UC01-011 / UC01-014 (formerly D114/D124)

Includes:
- Flush controller box to affix to wall
- Solenoid valve for connection to water supply
- 6v lithium battery or power transformer depending on chosen option

Features:
- Up to 80% savings on water costs
- Extremely reliable and low maintenance
- Passive infra-red sensor, occupancy detection
- Low power consumption - typical battery life between 3 and 5 years (battery model)
- Single battery input (battery model)
- Single valve output
- Default preset settings
- Adjustable cistern fill time (15 mins max)
- Adjustable delay time after sensor triggered (30 mins max)
- Janitorial flush (if sensor not triggered for 12 hours) 

            Flushmatic Instruction Manual

The original KWC DVS ceiling mounted 'Downlighter' model and predecessor to the 'Pearl'. This model remains a popular model, not least for its great reputation for reliability.

Includes:

- Solenoid valve for connection to water supply

- Sensor, incorporating flush controller system, for fitting into ceiling above urinals

- 6v lithium battery (Duracell 223 (CR-P2) or similar) or power transformer depending on power option chosen.

Features:
- Up to 80% savings on water costs
- Extremely reliable and low maintenance
- Passive infra-red sensor, occupancy detection
- Low power consumption - typical battery life between 2 and 4 years (battery model)
- Single battery input (battery model)
- Single valve output
- Default pre-set settings
- Adjustable cistern fill time (15 mins max)
- Adjustable delay time after sensor triggered (30 mins max)
- Janitorial flush (if sensor not triggered for 12 hours)
- Transformer to connect to mains electricity supply (mains model)

            Flushmatic Instruction Manual

 

LOW STOCK This product has been superseded by product UC01-001

The Flushmatic from KWC DVS (formerly Dart Valley Systems) is one of the most reliable flush controllers available. The controller box incorporates a sensor to detect urinal usage.

It is simple to install and calibrate.

Includes:

- Flush controller box to affix to wall

- Solenoid valve for connection to water supply

- Uses 6 x AA batteries (9v).

- LED Battery low indicator

(formerly the D135)

Features:
- Up to 80% savings on water costs
- Extremely reliable and low maintenance
- Passive infra-red sensor, occupancy detection
- Low power consumption - typical battery life of 2 to 4 years
- Single battery input
- Single valve output
- Default preset settings
- Adjustable cistern fill time (15 mins max)
- Adjustable delay time after sensor triggered (30 mins max)
- Janitorial flush (if sensor not triggered for 12 hours)
- Battery low indicator

           Flushmatic Instruction Manual

Features:
- reduced water consumption by up to 80%
- reliable and low maintenance
- passive infra-red sensor, occupancy detection
- single valve output
- adjustable flow rate
- janitorial flush (if sensor not triggered for 12 hours)
- WRAS approved Product