Retrofit Waterless to Standard Urinals

A smaller version of the long-established GW6 cartridge, the GW6-15 is designed to fit urinals that take a 1.5" BSP waste outlet. It has been thoroughly tested at customer sites and in the laboratory, with many refinements being made since its introduction in 2017. The GW6-15 allows odour-free operation in waterless urinals as well as those being low flushed, even if only once per week. It also works with normal flush frequencies but the main purpose of the cartridge is usually to save water, and therefore reduce carbon footprint.

A special silicone formula used in production of the dual "skirt" valves gives good tolerance of common cleaning chemicals within the pH range of 4 to 10. Typical life is 6 to 9 months but harsher cleaning products may reduce this.

The hole diameter required in the ceramic of the urinal to accommodate this conversion kit is 50mm +/-1.5 mm

Included:
- GW6-15 valve core cartridge with dual chemical-resistant silicone skirts
- waste outlet BSP 1.5", 80mm tail with thread break at 50mm
- Removal Key - multipacks supplied with a single key and no key supplied if selected
- Multifit Coupler x BSP Nut to 1½" Multifit Outlet T29LN

Features:
- typically lasts 6 to 9 months
- no chemical sealant required
- unique and patented 'dual skirt' valve to prevent odours
- unique and patented 'snorkel valve' to adjust for pressure and increase drainage rate
- tolerant of common cleaning chemicals
- tolerant of sluicing or flushing to help keep waste pipes clear - drainage rate of over 9 litres/min
- can be used as waterless or with flushing (no trap or u-bend required)
- relatively small disposable component and long life reduces impact on landfill
- extensively tested in the field and in the laboratory (see test results in PDF)

Recommended to be used in conjunction with Bactericidal Cleaner; sluicing once every 2 weeks, to extend valve life and keep waste pipes clear.

Aquafree Urinal Maintenance Devices are simply retrofitted into existing pipework. They combat smells and blockages whilst eliminating the need for water. The contents of the standard Waterless Start-up Kits enable urinals to operate with no flushing for a period of 3 months, after which new Aquafree cartridges will be required. Microbes dispensed by the cartridges break down the uric acid salts and other contents of urine, while regular use of Bactericidal Cleaner helps keep the pipework free from body fats, hair, and other debris.

Typical life is 3 to 4 months but harsher cleaning products may reduce this.

The hole diameter required in the ceramic of the urinal to accommodate this conversion kit is 50mm +/-1.5 mm

Included:
- HPKV SE000 cartridge
- Waste outlet 1.5" BSP x 65mm Long with backnut & rubber washer
- Removal key - multipacks supplied with a single key and no key supplied if selected
- Multifit coupler x BSP nut to 1½" Multifit outlet T29LN

Standard Exposed Urinal suitable for retrofit waterless conversion kits (sold separately)

If you need to replace some or all the urinals you are planning on converting to waterless, then this standard 50cm urinal is the perfect solution. The classic tear drop shape of this urinal will not look out of place in any washroom.
A plastic blanking stopper is supplied to cover the spreader hole for waterless use.
Please select your chosen waterless urinal conversion kit form the related products below.

Bowl Dimensions:  Height = 500mm  Width = 383mm  Projection from wall = 303mm
•     Wall mounted urinal in vitreous china
•     Large 500mm Height by 383mm Width
•     Similar in design to more expensive brands
•     Spreader hole allows for a low flushing option to be installed.

Pack includes:
- 1 x 50cm height Exposed Urinal
- 1 x Pair of  Urinal Wall Hangers
- 1 x Spreader hole blanking stopper

Mains version OUT OF STOCK - More due in Mid-January.

This Ultra-Low Flush controller can initiate a flush every 7 days so that the standing water in the cistern and flush pipes will be regularly 'purged', thus usually avoiding the need to carry out a dead-leg procedure to minimise the risk of legionella. This controllers  is also used in conjunction with Gentworks Urinal Maintenance Devices operating in waterless mode for sites where the weekly dosing procedure is difficult to adhere to.  For example, if the expectation is that urinals may only be dosed with Bactericidal Cleaner every 2 to 3 weeks rather than weekly, then the Ultra-Low Flush controller will help to ensure that debris is flushed away regularly. This is not as effective as weekly dosing but is a good compromise.

Includes:

           'FCV01 / UC01-010/011 Low flush Timer' Instruction Manual

 

Concealed Urinal suitable for retrofit waterless conversion kits (sold separately)

THIS PRODUCT IS USUALLY DELIVERED IN 2-5 WORKING DAYS VIA OUR STANDARD PALLET SERVICE
Please check pallet service delivery restrictions in the "About Delivery" tab before ordering.

For Concealed (rear waste pipe outlet) Installations only, the hole in the base is not suitable for a vertical waste pipe connection.

Please select your chosen waterless urinal conversion kit form the related products below.

Bowl Dimensions:  Height = 652mm  Width = 298mm  Projection from wall = 276mm
• Wall mounted concealed urinal in vitreous china
• Waste pipe connection must be horizontal (e.g. through panel)
• Stylish design ideal for high end look washrooms
• No spreader hole in the urinal

Pack includes:
- 1 x 65cm height concealed urinal
- 1 x Pair of  Urinal Wall Hangers