Waterless Bowls and Troughs

Standard Exposed Urinal suitable for retrofit waterless conversion kits (sold separately)

If you need to replace some or all the urinals you are planning on converting to waterless, then this standard 50cm urinal is the perfect solution. The classic tear drop shape of this urinal will not look out of place in any washroom.
A plastic blanking stopper is supplied to cover the spreader hole for waterless use.
Please select your chosen waterless urinal conversion kit form the related products below.

Bowl Dimensions:  Height = 500mm  Width = 383mm  Projection from wall = 303mm
•     Wall mounted urinal in vitreous china
•     Large 500mm Height by 383mm Width
•     Similar in design to more expensive brands
•     Spreader hole allows for a low flushing option to be installed.

Pack includes:
- 1 x 50cm height Exposed Urinal
- 1 x Pair of  Urinal Wall Hangers
- 1 x Spreader hole blanking stopper

GW6-15 Tanami Waterless Urinal Bowl

The GW6-15 Tanami waterless urinal uses the same valve and "snorkel" technology as the popular GW6 cartridge. The urinal is manufactured in ceramic and is suitable for exposed pipework. The Tanami now incorporates the latest version of the GW6-15 valve core with much faster drainage - approximately 12 litres per minute. This allows for more effective sluicing of the waste pipes to keep them even cleaner. Chemical resistance has also been much improved, particularly against bleach, to which silicone valves are particularly vulnerable. The dual valves are now manufactured in a special silicone to reduce the chance of damage from harsh cleaning chemicals, although these are still best avoided in order to maximise the life of the cartridge. 

Note:  The bowl shown in the YouTube video demonstrating the GW6-15 urinal system is not the Tanami.  

Key Benefits:

The GW6 Karoo waterless urinal bowl uses the same GW6 valve core as the popular GW6 cartridge. The urinal is manufactured in ceramic and is suitable for both concealed and exposed pipework. The compact design, projecting only 260mm from the wall, avoids splashback issues by having a deeper than normal bowl,

Key Benefits:

THIS PRODUCT IS USUALLY DELIVERED IN 2-5 WORKING DAYS VIA OUR STANDARD PALLET SERVICE

Please check pallet service delivery restrictions in the "About Delivery" tab before ordering.

• unique dual valve technology for added protection against odours
• small, replaceable GW615 valve core typically lasts for 6-12 months
• high drainage rate 
• waste pipe connection must be horizontal (e.g. through panel)
• reduced water and maintenance costs
• manufactured in high quality ceramic
• Stylish design ideal for high end look washrooms
• water saving reduces energy use and emissions
• lower installation costs—no water or electrics

 GW615 Patagonian Waterless Urinal

The GW6-15 Patagonian ceramic waterless urinal bowl uses the same valve and "snorkel" technology as the popular GW6 cartridge. The urinal is manufactured in ceramic and is suitable for concealed pipework. The Patagonian now incorporates the latest version of the GW6-15 valve core with much faster drainage - approximately 12 litres per minute. This allows for more effective sluicing of the waste pipes to keep them even cleaner. Chemical resistance has also been much improved, particularly against bleach, to which silicone valves are particularly vulnerable. The dual valves are now manufactured in a special silicone to reduce the chance of damage from harsh cleaning chemicals, although these are still best avoided in order to maximise the life of the cartridge. 

Instead of a fluid barrier, the GW6-15 valve uses a silicone double-skirt valve which is tolerant of both water and common cleaning chemicals.

See replacement valves for GW6-15

Concealed Urinal suitable for retrofit waterless conversion kits (sold separately)

THIS PRODUCT IS USUALLY DELIVERED IN 2-5 WORKING DAYS VIA OUR STANDARD PALLET SERVICE
Please check pallet service delivery restrictions in the "About Delivery" tab before ordering.

For Concealed (rear waste pipe outlet) Installations only, the hole in the base is not suitable for a vertical waste pipe connection.

Please select your chosen waterless urinal conversion kit form the related products below.

Bowl Dimensions:  Height = 652mm  Width = 298mm  Projection from wall = 276mm
• Wall mounted concealed urinal in vitreous china
• Waste pipe connection must be horizontal (e.g. through panel)
• Stylish design ideal for high end look washrooms
• No spreader hole in the urinal

Pack includes:
- 1 x 65cm height concealed urinal
- 1 x Pair of  Urinal Wall Hangers

GW6 Sahara Waterless Urinal Bowl 

The GW6 Sahara waterless urinal bowl uses the same GW6 valve core as the popular GW6 cartridge. The urinal is UK manufactured in glass-reinforced plastic (GRP) making it less heavy, despite its large format, than a typical ceramic bowl but much more resistant to damage. The gel coating is hand polished to a beautiful long-lasting finish. As you might guess, we're particularly proud of this product!

Key Benefits:

• unique dual valve technology for added protection against odours
• small, replaceable GW6 valve core typically lasts for 6 months, often as long as a year
• no sealant required
• no special tools required for maintenance
• high drainage rate
• manufactured in damage-resistant GRP
• simple to fit with bracket supplied
• waste pipe connection can be horizontal (e.g. through panel) or vertical

Instead of a fluid barrier, the GW6 cartridge uses a silicone double-skirt valve which is tolerant of both water and common cleaning chemicals. Click here for more about the GW6.

See replacement valves for GW6 products

How to avoid blockages in waste pipes:

Whilst the waste pipes of waterless urinals block less frequently than for most flushed urinals, uric acid salts can still form a sludge which eventually could cause a blockage. Sludge can be a particular problem if the waste pipes are shared with sinks or are poorly configured. Gentworks recommends periodic sluicing with Bactericidal Cleaner to break down this sludge and carry it away into the main drain. The GW6 valve can be sluiced regularly; once every 2 to 4 weeks is recommended. The solution used should be approximately 1 part Bactericidal Cleaner to 9 parts warm water from the washroom hot tap.

Includes:
- 1 x GW6 Sahara waterless urinal bowl fitted with GW6 valve housing and valve
- 1 x wall bracket with fixings

OUT OF STOCK - MORE DUE IN MARCH

Arica Waterless Urinal with Falcon Velocity Waterless Cartridge 

A great alternative to the now discontinued Armitage Shanks S6321 waterless urinal as it uses the same proven Falcon Velocity waterless urinal cartridge.

• Reduce expenditure on water and sewerage costs
• Saves water, thus reducing energy and emissions
• Runs on the popular Falcon Velocity waterless cartridge system
• Stylish design ideal for high end look washrooms
• No water supply piping or power to install
• Cartridge usually lasts around 3-4 months
• Anti-splash design
• Horizontal outlet for concealed waste pipes 

The Arica is a stylish waterless urinal Ideal for busy commercial environments such as  offices, restaurants, hotels, clubs, schools, and sports stadiums. 
This urinal uses the popular Falcon Waterfree Technologies waterless cartridge, a system cleaners and facilities management companies may already be familiar with. 
Maintenance is straightforward using  spray on waterless urinal safe cleaners and a simple cartridge change every 3-4 months or 4000-7000 uses.
The urinal is manufactured by a leading ceramics company and carries a 10 year guarantee on the quality of the ceramic. 

How it works

Urine, which is 96% water, flows down the surface of the urinal and into the unique Falcon cartridge. The cartridge is filled with a special liquid called Allseal, which is not only perfumed, but prevents foul air from rising up from the drain and into the washroom. It does this by floating on the surface inside the cartridge and trapping any particles at the cartridge base. Note that the effectiveness of the Allseal sealant can be impaired by sluicing or by incompatible cleaning chemicals, if proper care is not take,  However, there are no mechanical components to go wrong. Regular cleaning consists of spraying on cleaner and wiping it off. Replacing cartridges, a simple job,  has to be carried out every three to four months under average use conditions, but can last from 2 to 12 months, dependent on usage.

Includes:

- 1 x Arica waterless urinal
- 1 x Set of wall hangers
- 1 x Falcon Velocity waterless cartridge - Included

 Arica with Falcon Product Data Sheet

 Arica Waterless Urinal Installation Instructions

LAVA F7000 Waterless Urinal with Falcon Waterless Cartridge

THIS PRODUCT IS USUALLY DELIVERED IN 4-7 WORKING DAYS VIA OUR STANDARD PALLET SERVICE
Please check pallet service delivery restrictions in the "About Delivery" tab before ordering.

The LAVA is a stylish waterless urinal Ideal for busy commercial environments such as offices, restaurants, hotels, clubs, schools, and sports stadiums.
This urinal uses the popular Falcon Waterfree Technologies waterless cartridge, a system cleaners and facilities management companies may already be familiar with.
Maintenance is straightforward using spray on waterless urinal safe cleaners and a simple cartridge change every 3-4 months or 4000-7000 uses.

• Reduce expenditure on water and sewerage costs
• Saves water, thus reducing energy and emissions
• Runs on the popular Falcon Velocity waterless cartridge system
• Stylish design ideal for high end look washrooms
• No water supply piping or power to install
• Cartridge usually lasts around 3-4 months
• Anti-splash design
• Choice of Horizontal outlet for concealed waste pipes or Vertical outlet for exposed waste pipes

 How it works

Urine, which is 96% water, flows down the surface of the urinal and into the unique Falcon cartridge. The cartridge is filled with a special liquid called Allseal, which is not only perfumed, but prevents foul air from rising up from the drain and into the washroom. It does this by floating on the surface inside the cartridge and trapping any particles at the cartridge base. Note that the effectiveness of the Allseal sealant can be impaired by sluicing or by incompatible cleaning chemicals, if proper care is not take,  However, there are no mechanical components to go wrong. Regular cleaning consists of spraying on cleaner and wiping it off. Replacing cartridges, a simple job,  has to be carried out every three to four months under average use conditions, but can last from 2 to 12 months, dependent on usage.

Includes:
- 1 x LAVA F7000 wall urinal
- 1 x Set of wall hangers
- 1 x Falcon Velocity waterless cartridge

This Waterless Urinal has now been discontinued by the manufacturer Armitage Shanks / Ideal Standard.
We can offer the Falcon LAVA or Falcon Arica urinal as an alternative and it uses the same Falcon Velocity waterless cartridge.
See alternative Falcon Velocity waterless urinals below in related products.

Please contact us with your project requirements (quantity, lengths and timescale) and we’ll get back to you with current production and delivery times.

 GW6 Accona Waterless Urinal Trough in Grey Granite Finish 

Standard lengths = 1200mm or 1800mm

The GW6 Accona waterless urinal trough uses the same GW6 valve core as the popular GW6 cartridge. The urinal is manufactured in glass-reinforced plastic (GRP) making it robust and resistant to damage

 Key Benefits:

• unique dual valve technology for added protection against odours
• small, replaceable GW6 valve core typically lasts for 6 months, often as long as a year
• no sealant required
• no special tools required for maintenance
• high drainage rate - approximately 30 litres per minute, so can be sluiced
• manufactured in damage-resistant GRP
• simple to fit with the 3 brackets supplied
• waste pipe connection can be horizontal (e.g. through panel) or vertical
• can be manufactured in a range of colours to special order

 Instead of a fluid barrier, the GW6 cartridge uses a silicone double-skirt valve which is tolerant of both water and common cleaning chemicals

 See replacement valves for GW6 products

Includes:
- 1 x GW6 Accona 'grey granite' waterless urinal trough fitted with GW6 housing and valve
- 3 x wall bracket

  Cleaning

The GW6 waterless urinal system is tolerant of standard cleaning chemicals but care should be taken with GRP products. Only mild products should be used. For best results, we recommend Nviro-Clean and Bactericidal Cleaner for GRP urinals.

  How to avoid blockages in waste pipes

Whilst the waste pipes of waterless urinals block less frequently than for most flushed urinals, uric acid salts can still form a sludge which eventually could cause a blockage. Sludge can be a particular problem if the waste pipes are shared with sinks or are poorly configured.  Gentworks recommends periodic sluicing with Bactericidal Cleaner to break down this sludge and carry it away into the main drain. The GW6 valve can be sluiced regularly; once every 2 to 4 weeks is recommended.  The solution used should be approximately 1 part Bactericidal Cleaner to 9 parts warm water from the washroom hot tap. Sluicing volume should be approximately 2 litres for the Accona models. 

Please contact us with your project requirements (quantity, lengths and timescale) and we’ll get back to you with current production and delivery times. 

Standard lengths = 1200mm or 1800mm

The GW6 Accona waterless urinal trough uses the same GW6 valve core as the popular GW6 cartridge. The urinal is manufactured in glass-reinforced plastic (GRP) making it robust and resistant to damage

 Key Benefits:

• unique dual valve technology for added protection against odours
• small, replaceable GW6 valve core typically lasts for 6 months, often as long as a year
• no sealant required
• no special tools required for maintenance
• high drainage rate - approximately 30 litres per minute, so can be sluiced
• manufactured in damage-resistant GRP
• simple to fit with the 3 brackets supplied
• waste pipe connection can be horizontal (e.g. through panel) or vertical

 Instead of a fluid barrier, the GW6 cartridge uses a silicone double-skirt valve which is tolerant of both water and common cleaning chemicals

 See replacement valves for GW6 products

Includes:
- 1 x GW6 Accona waterless urinal trough fitted with GW6 housing and valve
- 3 x wall bracket

  Cleaning

The GW6 waterless urinal system is tolerant of standard cleaning chemicals but care should be taken with GRP products. Only mild products should be used. For best results, we recommend Nviro-Clean and Bactericidal Cleaner for GRP urinals.

  How to avoid blockages in waste pipes

Whilst the waste pipes of waterless urinals block less frequently than for most flushed urinals, uric acid salts can still form a sludge which eventually could cause a blockage. Sludge can be a particular problem if the waste pipes are shared with sinks or are poorly configured.  Gentworks recommends periodic sluicing with Bactericidal Cleaner to break down this sludge and carry it away into the main drain. The GW6 valve can be sluiced regularly; once every 2 to 4 weeks is recommended.  The solution used should be approximately 1 part Bactericidal Cleaner to 9 parts warm water from the washroom hot tap. Sluicing volume should be approximately 2 litres for the Accona models.