Drinking Water Fountains

This  wall mounted drinking fountain is constructed from a single-piece of moulded high grade 4mm thick polycarbonate ABS plastic. It can be installed for adult or junior height and features a smooth rounded shape, avoiding sharp corners.
Antimicrobial additive embedded in the basin material resists mould, mildew and grime to provide a cleaner surface. Designed to be installed in areas with a low risk of vandalism and more suitable than stainless steel for chlorine or salt water environments. Ideal for pop up events and festivals.
Supplied with a 32mm grated waste, mounting template and and your chosen dispenser(s). A tap hole bank is provided if a single dispenser is chosen. 

Depth: 322mm (projection from wall)
Height: 198mm (including 50mm high rear upturn but excluding dispenser)
Recommended mounting heights: Top of front Apron to finished floor; Junior 762mm, Adult 915mm

• Smooth rounded design
• Made from a single-piece high-grade polycarbonate (HDPE) plastic
• Choice of dispenser types and combinations
• Antimicrobial additive embedded within the plastic
• HDPE is easily recyclable and has lower embedded energy compared to stainless steel
• Integral splashback and mounting bracket
• 32mm waste outlet supplied
• 1/2" BSP water connections

Drinking fountains with bubblers provide a jet of water to the user under normal mains pressure which does not need a cup or drinking vessel.

NSF approved bubbler tap, heavy duty shielded chrome press button drinking water bubbler valve (tap) with easily replaceable self-contained Pro-Flo™ cartridge. Product is certified to NSF/ANSI 372.

Bottle / Cup filler: self-closing push button valve fitted with a 255mm high, chrome plated, fixed brass swan-neck spout. Water only flows whilst the button is depressed. For safety reasons, glass/bottle fillers are not designed to withstand heavy impact and should only be installed in areas with supervision or low risk of vandalism.

Optional but recommended is our Mains water connection kit designed for aiding the connection of drinking fountains to a mains water supply pipe. Protects the drinking fountain by preventing the maximum pressure rating being exceeded. Double check valve prevents backward flow of liquid. Optimal pressure is 1.5-2 bar; do not exceed 3 bar.

This durable wall-mounted drinking fountain is constructed from 1.5mm thick satin-polished stainless steel. It can be installed at either adult or junior height for added versatility. To ensure safety, the unit boasts a smooth rounded design, eliminating sharp corners that could pose a risk to users.

• Smooth rounded design
• 1.5mm thick grade 304 satin stainless steel
• Raised landing area around bubbler tap
• WRAS approved bubbler (tap) supplied as standard
• 32mm waste outlet supplied
• Integral splashback
• Side positioned bubbler for optimum flow trajectory
• Suitable for indoor or outdoor installation
• Ideal for schools and public amenities

This model comes with appropriate wall mounting brackets and is manufactured in one piece from grade 304 stainless steel.

For ease of use, the bubbler valve is situated to one side, on a raised landing area and features a shielded outlet nozzle. The integrated splashback provides for ease of cleaning.

This stainless steel drinking fountain is suitable for outside installation but will need to be isolated and drained down during periods of freezing weather to prevent damage to the valve and pipework.

Supplied with wall bracket, 32mm grated waste fitting and a chrome plated brass shielded bubbler complete with water inlet fitting to suit 15mm diameter pipework.

Depth: 350mm (projection from wall)
Height: 225mm (including 77mm high rear upturn but excluding bubbler)
Recommended mounting heights: Top of front Apron to finished floor Junior 762mm, Adult 915mm

Drinking fountains with bubblers provide a jet of water to the user under normal mains pressure which does not need a cup or drinking vessel.

WRAS approved bubbler tap, supplied as standard with the drinking fountain a chrome press button drinking water bubbler valve (tap) approved product in accordance with UK water regulations.

NSF approved bubbler tap, heavy duty shielded chrome press button drinking water bubbler valve (tap) with easily replaceable self-contained Pro-Flo™ cartridge. Product is certified to NSF/ANSI 372. If you require this option please select the dispenser type above.

Bottle / Cup filler: self-closing push button valve fitted with a 255mm high, chrome plated, fixed brass swan-neck spout. Water only flows whilst the button is depressed. For safety reasons, glass/bottle fillers are not designed to withstand heavy impact and should only be installed in areas with supervision or low risk of vandalism. If you require this option please select the dispenser type above.

Optional but recommended is our Mains water connection kit designed for aiding the connection of drinking fountains to a mains water supply pipe. Protects the drinking fountain by preventing the maximum pressure rating being exceeded. Double check valve prevents backward flow of liquid.

 
GW-361 Product Data Sheet

 GW-361 Installation Instructions

UPC 700461826736

This durable wall-mounted drinking fountain is constructed from 1.5mm thick satin-polished stainless steel. It can be installed at either adult or junior height for added versatility. To ensure safety, the unit boasts a smooth rounded design, eliminating sharp corners that could pose a risk to users.

• Smooth rounded design
• 1.5mm thick grade 304 satin stainless steel
• Raised tap landing area
• 32mm waste outlet supplied
• Integral splashback
• Suitable for indoor or outdoor installation

This model comes with appropriate wall mounting brackets and is manufactured in one piece from grade 304 stainless steel.

For ease of use, the dispenser is situated to one side, on a raised landing area. The integrated splashback provides for ease of cleaning.

This stainless steel drinking fountain is suitable for outside installation but will need to be isolated and drained down during periods of freezing weather to prevent damage to the valve and pipework.

Supplied with wall bracket, 32mm grated waste fitting and bottle filling swan-neck spout complete with water inlet fitting to suit 15mm diameter pipework.

Depth: 350mm (projection from wall)
Height: 225mm (including 77mm high rear upturn but excluding dispenser)
Recommended mounting heights: Top of front Apron to finished floor Junior 762mm, Adult 915mm

Dispenser type: Self-closing push button valve fitted with a 255mm high, chrome plated, fixed brass swan-neck spout. Water only flows whilst the button is depressed. For safety reasons, glass/bottle fillers are not designed to withstand heavy impact and should only be installed in areas with supervision or low risk of vandalism.

Optional but recommended is our Mains water connection kit designed for aiding the connection of drinking fountains to a mains water supply pipe. Protects the drinking fountain by preventing the maximum pressure rating being exceeded. Double check valve prevents backward flow of liquid. Optimal pressure is 1.5-2 bar; do not exceed 3 bar.

 GW-361 Product Data Sheet

 GW-361 Installation Instructions

This robust wall-mounted drinking fountain is constructed from 1.5mm thick satin-polished stainless steel. Its versatile design allows for installation at either adult or junior height. Prioritising safety, the unit features a smooth, rounded design, eradicating any sharp corners that might pose a risk to users. Furthermore, it comes equipped with a deep under-shroud and a removable baseplate, offering the flexibility to conceal water inlet and waste pipe connections. If through-wall inlet and outlet connections aren't feasible, you have the option to leave the baseplate unfitted.

• Smooth rounded design
• 1.5mm thick grade 304 satin stainless steel
• WRAS approved bubbler (tap) supplied as standard
• Under-shroud provides protection for water connections
• Integral splashback
• Side positioned bubbler for optimum flow trajectory
• Suitable for indoor or outdoor installation
• Ideal for schools and public amenities

For ease of use, the bubbler valve is situated to one side, on a raised landing area and features a shielded outlet nozzle. The integrated splashback provides for ease of cleaning.

This stainless steel drinking fountain is suitable for outside installation but will need to be isolated and drained down during periods of freezing weather to prevent damage to the valve and pipework.

Pack Includes:
• Wall bracket
• Security screw removal key
• 32mm grated waste fitting
• Chosen dispenser
• Inlet fitting for 15mm diameter pipework

Depth: 360mm (projection from wall)
Height: 290mm (including 75mm high rear upturn but excluding bubbler)
Recommended mounting heights: Top of front Apron to finished floor; Junior 762mm, Adult 915mm

Drinking fountains with bubblers provide a jet of water to the user under normal mains pressure which does not need a cup or drinking vessel.

WRAS approved bubbler tap, supplied as standard with the drinking fountain a chrome press button drinking water bubbler valve (tap) approved product in accordance with UK water regulations.

NSF approved bubbler tap, heavy duty shielded chrome press button drinking water bubbler valve (tap) with easily replaceable self-contained Pro-Flo™ cartridge. Product is certified to NSF/ANSI 372. If you require this option please select the dispenser type above.

Bottle / Cup filler: self-closing push button valve fitted with a 255mm high, chrome plated, fixed brass swan-neck spout. Water only flows whilst the button is depressed. For safety reasons, glass/bottle fillers are not designed to withstand heavy impact and should only be installed in areas with supervision or low risk of vandalism. If you require this option please select the dispenser type above.

Optional but recommended is our Mains water connection kit designed for aiding the connection of drinking fountains to a mains water supply pipe. Protects the drinking fountain by preventing the maximum pressure rating being exceeded. Double check valve prevents backward flow of liquid.

 GW-362 Product Data Sheet

 GW-362 Installation Instructions

UPC 700461826743

This robust wall-mounted drinking fountain is constructed from 1.5mm thick satin-polished stainless steel. Its versatile design allows for installation at either adult or junior height. Prioritising safety, the unit features a smooth, rounded design, eradicating any sharp corners that might pose a risk to users. Furthermore, it comes equipped with a deep under-shroud and a removable baseplate, offering the flexibility to conceal water inlet and waste pipe connections. If through-wall inlet and outlet connections aren't feasible, you have the option to leave the baseplate unfitted.

• Smooth rounded design
• 1.5mm thick grade 304 satin stainless steel
• Raised landing area around tap
• 32mm waste outlet supplied
• Under-shroud provides protection for water connections
• Integral splashback
• Side positioned tap
• Suitable for indoor or outdoor installation
• Ideal for schools and public amenities

This model comes with appropriate wall mounting bracket.
For ease of use, the dispenser is situated to one side, on a raised landing area. The integrated splashback provides for ease of cleaning.

This stainless steel drinking fountain is suitable for outside installation but will need to be isolated and drained down during periods of freezing weather to prevent damage to the valve and pipework.

Pack Includes:
• Wall bracket
• Security screw removal key
• 32mm grated waste fitting
• Bottle filling swan-neck spout
• Inlet fitting for 15mm diameter pipework

Depth: 360mm (projection from wall)
Height: 290mm (including 75mm high rear upturn but excluding dispenser)
Recommended mounting heights: Top of front Apron to finished floor; Junior 762mm, Adult 915mm 

Dispenser type: Self-closing push button valve fitted with a 255mm high, chrome plated, fixed brass swan-neck spout. Water only flows whilst the button is depressed. For safety reasons, glass/bottle fillers are not designed to withstand heavy impact and should only be installed in areas with supervision or low risk of vandalism.

Optional but recommended is our Mains water connection kit designed for aiding the connection of drinking fountains to a mains water supply pipe. Protects the drinking fountain by preventing the maximum pressure rating being exceeded. Double check valve prevents backward flow of liquid. Optimal pressure is 1.5-2 bar; do not exceed 3 bar.

 GW-362 Product Data Sheet

 GW-362 Installation Instructions

This wall mounted drinking fountain is constructed from Glass Fibre Reinforced Polyester Resin, the same tough material often used for boat hulls.

The smooth rounded design eliminates sharp corners which could cause injury, while the gel-coat finish is resistant to staining and damage as is easy to clean without the need for strong cleaning products. The drinking fountain is also corrosion resistant making it more suitable than stainless steel for chlorine or salt water environments.

It can be installed at adult or junior height and features a 255mm high under-shroud and baseplate to conceal the water supply and waste connections to deter vandalism.

Each drinking fountain is supplied with a 32mm flush grated waste fitting and a chrome plated shielded bubbler (or swan-neck bottle filler) complete with a self-closing push button valve. The valve incorporates a flow adjuster and strainer and is supplied with a water inlet fitting to suit 15mm diameter pipework.

Width: 300mm

Drinking fountains with bubblers provide a jet of water to the user under normal mains pressure which does not need a cup or drinking vessel.

 GWDF02 Product Data Sheet

This wall mounted drinking fountain is constructed from Glass Fibre Reinforced Polyester Resin, the same tough material often used for boat hulls.

The smooth rounded design eliminates sharp corners which could cause injury, while the gel-coat finish is resistant to staining and damage as is easy to clean without the need for strong cleaning products. The drinking fountain is also corrosion resistant making it more suitable than stainless steel for chlorine or salt water environments.

It can be installed at adult or junior height and features a 255mm high under-shroud and baseplate to conceal the water supply and waste connections to deter vandalism.

Each drinking fountain is supplied with a 32mm flush grated waste fitting and a chrome plated shielded bubbler (or swan-neck bottle filler) complete with a self-closing push button valve. The valve incorporates a flow adjuster and strainer and is supplied with a water inlet fitting to suit 15mm diameter pipework.

Width: 300mm

Drinking fountains with bubblers provide a jet of water to the user under normal mains pressure which does not need a cup or drinking vessel.

 GWDF02 Product Data Sheet

This traditional-style Cast Iron drinking fountain has been a fixture in some of the capital's schools for many years, and it is still being manufactured in London to this day.

Features
• Hygienic design - The water jet is located in a dished recess protected by a stainless steel cover plate which prevents contact with the nozzle.
• Bottle and cup filling - Innovative downward water jet design allows users the ability to fill sports bottles and is less sensitive to drops in water pressure.
• Easy operation - Toggle lever operation makes it easy for small children to operate and drink from, a slight push or pull being all that is necessary.
• Anti-tamper- Water control components are enclosed in the back structure reducing the risk of vandalism or tampering.
• Simple connections - Exposed water supply and waste drainage connections are made to the underside of the drinking fountain.
• Frost damage protection - If the water supply is accidently left on during freezing conditions a sacrificial flange washer prevents frost damage to valve (Washer available as a spare (NW86/15)

Pressures & operating conditions:
½” BSP exposed water inlet connection
¾” BSP exposed waste drainage connection (Optional 1¼” BSP waste adaptor is available HN01012)
Factory set to suit 2.8bar water pressure (Can be adjustable by the installer)
Due to the weight of the drinking fountain it is only suitable for fixing to solid walls or timber frame.

 DFNW-860 Novus Product Data Sheet

Dimensions:

Width: 203mm
Depth: 356mm (projection from wall) 
Height: 406mm
Weight: 11.8Kg
 

 DFNW-860 Novus Installation and Maintenance Instructions

This dual-purpose floor standing unit is made from 1.5mm thick Grade 304 stainless steel and provides drinking water from both a traditional bubbler valve and via a convenient recessed bottle filling station suitable for use with 0.5, 0.75 and 1.0 litre bottles. The unit is hygienic, robust and suitable for both indoor and, when proper precautions are observed, outdoor use. The shielded self-closing bubbler valve is positioned for ease of use and the bottle filler is activated by a simple push button mounted on top of the unit. The whole unit features a smooth radiused design eliminating corners. The drinking fountain and bottle filling station has an integral full height shroud to conceal the water supply and waste pipework. The unit is supplied pre-plumbed with a single flexible water inlet hose and is fitted with dual water traps and waste pipes terminating in one connection.

Optional but recommended is our Mains water connection kit designed for aiding the connection of drinking fountains to a mains water supply pipe. The water connection kit protects the drinking fountain by preventing the maximum pressure rating being exceeded. Double check valve prevents backward flow of liquid. 

Click on the Product Data Sheets tab for downloadable instructions and data sheets.